[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: waterborne woodfinishing experts



I would not rule out UV curable coatings for wood (quickly rising market in
USA and already firmly established in Europe) and low temperature powder
coatings are being developed.

Wood waste can be source reduced with old technology such as finger jointing
and slat gluing (anything bigger than 1/4"x1/2"x6" has been reused
successfully by gluing together) to hydraulic splitters (to replace sawing -
leaves no sawdust or chips).

Visit our web site's publication page (site URL below my signature) for
manuals on Wood Furniture (a little outdated) and UV Applied Technology.

Steve Hillenbrand
Industrial Waste Reduction Engineer
Synterprise Group, Division of Tennessee Valley Authority
(423) 632-8489; (423) 632-3616 (fax)
sjhillenbrand@tva.gov
TVA IWR HomePage  www.tva.gov/orgs/iwr/iwrhome.htm

> ----------
> From: 	Sherry Davis[SMTP:sdavis@oz.oznet.ksu.edu]
> Reply To: 	Sherry Davis
> Sent: 	Wednesday, July 15, 1998 6:44 PM
> To: 	p2tech@great-lakes.net
> Subject: 	waterborne woodfinishing experts
> 
> Dear P2techs,
> We are planning a workshop for wood manufacturers and finishers.  
> Part of the workshop will be hands-on use of equipment and 
> demonstrations of recommemded P2 technologies.  I am seeking a 
> presenter with expertise in waterborne coatings and how to deal with 
> the problems encountered during their use.  If anyone has suggestions 
> please email.  I would also like to talk to anyone about innovative 
> wood waste reuse options and can be reached at the number below.  Any 
> help is appreciated.
> thanks,
> Sherry Davis
> Sherry J. Davis
> Industrial P2 Specialist
> sdavis@oz.oznet.ksu.edu
> 133 Ward Hall,KSU
> Manhattan, KS  66506-2508
> 913-532-6501   Fax: 913-532-6952
>