[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Food Waste - ideas for avoidance and reuse
Our program put out a Restaurant Waste Min guide last year. Not sure if it's
what you had in mind, but hope some of the information helps. Let me
know if you want a PDF version or hardcopy sent to you.
Hawaii Dept of Health
Waste Minimization Coordinator
From: "Callahan, Mike" <Mike.Callahan@jacobs.com>
To: "'Newman Greg'" <NEWMANG@epa.nsw.gov.au>
Cc: "'P2Tech'" <firstname.lastname@example.org>
Subject: RE: Food Waste - ideas for avoidance and reuse
Date: Thu, 16 Mar 2000 16:36:37 -0800
Reply-to: "Callahan, Mike" <Mike.Callahan@jacobs.com>
Interesting stuff. We once did a P2OA for a major aerospace company and
people thought it was strange that we included cafeteria waste. We included
it because the facility hired a waste hauler to clean out all sumps on a
routine schedule. This meant that kitchen grease was being mixed in with all
the other industrial sludges. While this practice made it less expensive to
collect and haul all oily sump waste from the site, it drove the disposal
cost sky high because of the hazardous waste surcharge for solids.
Some practices we considered for reducing cafeteria waste included the
promotion of fat-free days (less frying) and the installation of a grease
filtration system to promote reuse. While we didn't think of it at the time,
maybe someone should come up with a simple system to convert the kitchen
grease into soap. The use of teflon lined mixing pots and pans to ease
cleaning is often mentioned but I'm not sure how much study has been done.
This option has often been mentioned as a way to reduce waste associated
with paint production (mixing).
Have you contacted any food producers to find out what causes bad batches?
Such questions could lead to identifying a wide range of P2 projects. I
could see the need for improved temperature and humidity monitoring in
baking operations, sterile packaging to promote shelf life, sanitary piping
design to prevent raw material spoilage, clean-in-place systems to minimize
cleaning waste, and so on. I'm sure there is plenty more. Good luck.
From: Newman Greg [mailto:NEWMANG@epa.nsw.gov.au]
Sent: Wednesday, March 15, 2000 3:20 PM
Cc: Bowen Lindi
Subject: Food Waste - ideas for avoidance and reuse
Our office is coordinating a grant program which funds projects in the
commercial and industrial sectors. One of the four waste streams which has
been targeted for funding this year is food waste. Funding is available
only for avoidance and reuse projects - which excludes composting. Due to
health and time factors, food is different from most other waste streams.
As a result potential applicants are struggling with ideas for fundable
Some of the suggestions we have given include:
1. Diverting raw materials or reclaiming unused raw materials back to the
original production process or to another manufacturer.
2. Reusable pallet or shipping container system for delivery
3. Reuse of packaging - take back program
4. Designing packaging to minimise waste generation
5. Food bank approaches are a possibility but been funded in past
rounds - duplication.
We are looking for other suggestions or case studies we can pass on the
potential applicants. All suggestions are welcomed. Thanks in advance.
Greg Newman, Waste Programs Unit
New South Wales, Environment Protection Authority
PO Box A290
Sydney South NSW 1232
Ph: 02 9995 5638, Fax: 02 9325 5930
Website: www.epa.nsw.gov.au <http://www.epa.nsw.gov.au>