[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Metal oxidation techniques-Reply



Warren,

The the steel you referred to is called corten steel or more correctly
trademarked as "Cor-Ten" Steel by US Steel.  I'm fairly certain that it is
an alloy rather than a surface treatment.  The USX Tower in Pittsburgh
is the building you referred to. It is the tallest building in Pittsburgh
at 64 stories of Cor-Ten. It appears to be great for USX but not for 
nearby buildings and pavement which have become somewhat rust stained.  
Another notable structure of Cor-Ten is the New River Bridge in West
Virginia.  
Why it hasn't become more common for bridges and such is a good P2 question.

Bob Gamble
PA DEP


-----Original Message-----
From: wjw5@psu.edu [mailto:wjw5@psu.edu]
Sent: Friday, March 31, 2000 5:27 PM
To: P2tech@great-lakes.net
Subject: RE: Metal oxidation techniques-Reply


Since we're making referrals, here's another one: USX (formerly US Steel).
In the 1970's US Steel built a building in Pittsburgh where the external
steel parts were treated in such a way to form micro-crystals of ferric
oxide on the exterior surfaces. The crystaline structure was such that the
"rust" adhered to the steel substrate rather that flaking off. This
provided both a uniform color and a continuous protection of the steel
substrate, enabling it to "last virtually forever" (my paraphrase based on
my recollection - may be suspect given the elapsed time). It got a lot of
hype when it was built. Have heard nothing since. Have seen the building,
recently in fact - it's one of the skyscrapers downtown. It appears to be
performing as originally billed. USX could probably give you an update and,
if the process is not proprietary (as they implied 20+ years ago), may
share it with you.

Warren

>X-Authentication-Warning: superior.great-lakes.net: majordom set sender to
>owner-p2tech@great-lakes.net using -f
>Date: Fri, 31 Mar 2000 13:51:23 -0700
>From: "Eileen D. Torok" <Eileen@uwyo.edu>
>Subject: RE: Metal oxidation techniques
>To: P2TECH <p2tech@great-lakes.net>
>MIME-version: 1.0
>Sender: owner-p2tech@great-lakes.net
>Precedence: bulk
>Reply-To: "Eileen D. Torok" <Eileen@uwyo.edu>
>List-Name: p2tech
>X-Loop: p2tech
>
>This isn't an engineering-oriented suggestion, but it just might work. Try
>asking a local college art department or sculpture studio. Artists who work
>in bronze know all kinds of chemistry "tricks of the trade" for achieving
>various patinas or finishes on their work.
>Eileen Torok
>Regulated Materials Management Center
>University of Wyoming
>
> -----Original Message-----
>From:   Butner, Robert S [mailto:butner@battelle.org]
>Sent:   Friday, March 31, 2000 11:23 AM
>To:     P2TECH
>Subject:        RE: Metal oxidation techniques
>
>I agree with Terry Foecke -- this may be the only time I've seen someone
ask
>how to ENCOURAGE rust.
>I'll be the first to admit I know next to nothing about corrosion
>processes*, except that "rust never sleeps."
>But I wonder if exposure to an ozone atmosphere in addition to the higher
>temperature would eliminate or reduce the need for brine?
>
>Scott Butner (butner@battelle.org)
>Senior Research Scientist, Environmental Technology Division
>Pacific Northwest National Laboratory
>4500 Sandpoint Way, Seattle WA   98105
>(206)-528-3290 voice/(206)-528-3552 fax
>http://www.chemalliance.org/
>
>
>*The fact that some would say I don't need to qualify my ignorance in such
a
>narrow way is another matter entirely, and we'll ignore that for now.
>

wjw5@psu.edu

Warren J. Weaver
PENNTAP
227 W. Market St.
York, PA 17401

ph: (717) 848-6669

fax: (717) 854-0087

website: www.penntap.psu.edu

Recycle Electrons
Use E-commerce

<> 
<>
<> Celebrate!  30th Anniversary of Earth Day - April 22 -
www.dep.state.pa.us