[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Recovery of painting solvents from air stream

I believe that Air Products had a system of recovering organics from air
streams using activated carbon with nitrogen being used to strip the
carbon. The nitrogen is recovered.

<<< Alfonso Manrique <almanriq@mafalda.univalle.edu.co>  5/30  5:49p >>>
On Tue, 30 May 2000, Robert Michalowicz wrote:

> Greetings All:
> Your assistance in the following problem would be appreciated!
> A manufacturer paints parts and the solvent used in the paint
> formulation,  n-butyl acetate, gets into the exhaust air (13,000 CFM) in
> trace amounts (500 ppm).  The air is passed over activated carbon to
> remove the n-butyl acetate.  The activated carbon is then re-activated
> using low pressure steam.  The steam is condensed and most of the
> n-butyl acetate is decanted as a separate phase from the water and
> re-used.  However, the n-butyl acetate is slightly soluble in the water
> and some remains in the water along with decomposition products - acetic
> acid and n-butanol.  The BOD of this wastewater is 10,000 mg/L and it
> needs to be reduced before discharge.
> I have several questions:
> 1)  Does the acetic acid contribute to the BOD?
Yes, is one of the path of organic compounds biological degradation

> 2)  Is there a better way to approach solvent recovery from dilute air
> streams?

No, I think is the better way if you are really interested in recovery,
otherwise use Biofiltration or Incineration

> 3)  What would be the advantages/disadvantages of using nitrogen to
> re-activate the activated carbon?

May be the advantage is just to condense the organic compounds alone,
without water but I supposse the cost of the Nitrogen is higher than steam
and the condensacion temperature lower in order to have low amount of
organic compound in the gas waste, And may be require some treatment for
it at the pipe end ( Biofiltration )

> 4)  What is the best treatment technology for this wastewater containing
> n-butyl acetate, acetic acid, n-butanol?

May be an anaerobic system

> 5)  Steam stripping has been suggested, but doesn't the steam have to be
> re-condensed, getting the problem of dilute organics in a wastewater
> stream once again?  Can the organics be recovered from a steam stripper?

Or air stripping, in that case the waste gas probably must be treated in
the same facilities as biofiltration.
> 6)  How about oxidation with peroxide and UV?  What is the removal
> efficiency?

I dont know
> Thanks,
> Rob Michalowicz, P.Eng.
> Chem Process & Environment Inc.