[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Available Documents - Round Three




Our pending move requires a practical approach to the older and less used documents in our resource center.  Please email me directly if you are interested in any of the following documents, and I'll mail them to you shortly.  Otherwise their best outlook is landfill gas recovery.  

David Herb
Environmental Engineer
Pollution Prevention Section
MDEQ - Environmental Assistance Division
2nd Floor Town Center, 333 S. Capitol
P.O. Box 30457
Lansing, MI 48909-7957

Phone: 517-241-8176
Fax: 517-373-3675
Email: herbdw@state.mi.us 


"Conservation of Chromium in the Tanning Industry," University of Cincinnati, 1981

"Design and Development of a Pilot-Scale Debris Decontamination System," EPA/540/S5-91/006, September 1991

"Gravity Pressure Vessel - Supercritical Wet Oxidation," US Patent 4,792,408, December 1989

"Innovative Destruction of Complex Industrial Wastes - Auto Oxidation of Tannery Beamhouse Wastewater: Project Summary," EPA-600/S2-80-210, January 1981

"Landfill Capacity in the Year 2000: Special Report," NSWMA, 1989

"Printed Circuit Board Manufacturers: Fact Sheet," California Department of Health Services, August 1989

"Protecting Health and Safety at Hazardous Waste Sites: An Overview," EPA/625/9-85/006, September 1985

"RCRA & Laboratories," American Chemical Society, September 1986

"The Ongoing Need for Sanitary Landfills: Facts on Municipal Solid Waste," Focus No. 5, February 1991

"Waste Minimization Assessment for a Manufacturer of Aluminum Cans," EPA/600/M-91/025, July 1991

"Waste Minimization Assessment for a Manufacturer of Silicon-Controlled Rectifiers and Schottky Rectifiers," EPA/600/S-92/036, September 1992

"Waste Minimization Assessment for a Manufacturer of Speed Reduction Equipment," EPA/600/M-91/046, October 1991

"Waste Minimization in the Printed Circuit Board Industry - Case Studies: Project Summary," EPA/600/S2-88/008, March 1988

"Waste Reduction Activities and Options for a Manufacturer of Artists Supply Paints," EPA/600/S-92/045, October 1992

"Waste Reduction Activities and Options for a Manufacturer of Commercial Refrigeration Units," EPA/600/S-92/047, October 1992

"Waste Reduction Activities and Options for a Manufacturer of Finished Leather," EPA/600/S-92/039, October 1992

"Waste Reduction Activities and Options for a Manufacturer of Paints Primarily for Metal Finishing," EPA/600/S-92/040, October 1992

"Waste Reduction Activities and Options for a Manufacturer of Room Air Conditioning Units and Humidifiers," EPA/600/S-92/042, October 1992

 "Waste Reduction Activities and Options for a Manufacturer of Systems to Produce Semiconductors," EPA/600/S-92/050, October 1992

"Waste Reduction for the Pesticide Formulating Industry: Fact Sheet," California Department of Health Services, March 1989

"Waste Reduction Study Final Report for ADC Telecommunications," Environmental Research Group, Ann Arbor, MI, February 1986

"Waste-To-Energy: Facts on Municipal Waste," Focus No. 6, September 1991