[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: adhesives

Try contacting the PPRC http://www.pprc.org/pprc/index.html

Regarding the 1996 project to convert a shoe manufacturing, solvent-based adhesive curing process to a water-based adhesive manufacturing operation: 


David Herb
Environmental Engineer
Pollution Prevention Section
MDEQ - Environmental Assistance Division
Constitution Hall
1st Floor, North Tower
525 West Allegan
P.O. Box 30457
Lansing, MI 48909-7957

Phone: 517-241-8176
Fax: 517-373-3675
Email: herbdw@michigan.gov

MDEQ - Environmental Assistance Center 800-662-9278
MDEQ - EAD Website http://www.deq.state.mi.us/ead/

>>> Janet Clark <clarkjan@turi.org> 12/11/01 01:34PM >>>
HI Listies,

This is an interesting question about adhesives.  Please post your response
to Jeff as he is not on this list.  We want to hear your responses too, so
include posting to p2tech!

Janet Clark

I am a shoemaker living in Stratford, Ontario.  I 
am presently developing an eco-friendly shoe made of recycled materials.  I 
create shoes using a variety of post-consumer materials, such as reclaimed 
burlap coffee sacks, tires and intertubes, unusable clothing, dryer lint, 
etc.  While my project is still in the incubation stages, I wish to make 
them as environmentally friendly as possible.

I have spent much time recently investigating environmentally-friendlier 
adhesives that might be available, unfortunately to little avail.  This is 
where I am hope you might be able to help me.  The commonly used adhesive 
for shoemaking is Barge All-Purpose Cement (manufactured by Quabaug).  I am 
looking to replace Barge with something less harmful to the environment
(and myself).  Any commercially available "eco-friendly" adhesives (such as 
Pres-Tite Green Contact Cement) do not have the strength or durability 
sufficient for holding together a pair of shoes.  I was wondering if you 
knew of any adhesives that are available that might help, or if you knew of 
anyone that I should be approaching to aid me in this search.

The other product that I am looking to replace is Rubber Latex.  I presently 
treat old burlap coffee sacks with Rubber Latex to create a "Leather 
Alternative".  Do you know if there is some type of natural alternative that 
has similar properties to rubber latex?

If you have any questions or need further information, feel free to contact 
me.  You can e-mail me at blue_pariah@hotmail.com or I can be reached via 
the phone at (519) 273-0586.

Thank you very much for taking the time to read this.  Any insight you may 
have would be very much appreciated.  I was very impressed by what TURI is 
doing.  I'm glad the Toronto Environmental Alliance turned me on to your 
Institute.  Thanks again!

Keep up the good work,

Jeff Churchill

take only memories
leave only footprints
kill only time

Janet Clark <clarkjan@turi.org>
Associate Director for Information
MA Toxics Use Reduction Institute
University of Massachusetts
One University Ave.
Lowell, MA  01854-2866
Tel 978-934-3346, Fax 978-934-3050