[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Cost Calculator for Body Shops



Definitely a need for that.  Good work.

Tomas Vinson-Peng
www.srwm.org

Fax: 512/239-3165
Phone: 512/239-3182

Engineering Specialist
Texas Commission on Environmental Quality
MC112
PO Box 13087
Austin, Tx 78711-3087
tvinson@tnrcc.state.tx.us


Disclaimer:  Regulatory guidance  e-mails are provided to quickly get you an answer to legal requirements.  They are not a substitute for compliance with the regulation, but guidance based on the best information available to the staff of TNRCC at the time.


>>> Sue Schauls <Sue.Schauls@uni.edu> 03/13/03 09:10AM >>>
Cost Calculators for Body Shops were developed by the Iowa Waste Reduction Center's Small Business Pollution Prevention Center. The project's goal was to break down the barrier to implementation of equipment that is useful in waste reduction and pollution prevention. The project write up can be found at
http://www.iwrc.org/programs/calcs.cfm 

The IWRC has developed three cost calculators to help the small auto body repair shop determine if it is beneficial for a facility to invest in equipment. The equipment evaluated are: 
  a.. HVLP Sprayguns, LaserTouch® Device, & STAR® training program, 
  b.. Small Batch Solvent (Thinner) Distillation Units and 
  c.. Automatic Gun Wash Units. 
Sources of information used to develop the calculators can be found with each individual calculator. Information needed to use the calculators is limited to the amount of paint used per year, the average cost of paint used, and/or the amount of solvent/thinner used per year. 

My apology for cross posting,

Sue

Sue Schauls
Program Manager
Small Business Pollution Prevention Center
Iowa Waste Reduction Center
1005 Technology Parkway
Cedar Falls, Iowa 50613
1-800-422-3109
319/273-8905
Fax: 319/268-3733
Sue.Schauls@UNI.edu


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
p2tech is hosted by the Great Lakes Information Network:
http://www.great-lakes.net
To unsubscribe from this list: send mail to majordomo@great-lakes.net
with the command 'unsubscribe p2tech' in the body of your message. No
quotes or subject line are required.
About : http://www.great-lakes.net/lists/p2tech/p2tech.info
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *