[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Titanium Saw Fines



Depending on the thickness of the material being cut and what else is done with it after cutting, maybe replacing the saw with a different cutting process would work?

I found the following as a description of some other options that might be considered:

http://www.deutschetitan.de/eng/profi/kb17.html

Mark Snyder
Pollution Prevention Specialist
Minnesota Office of Environmental Assistance

-----Original Message-----
From: owner-p2tech@great-lakes.net
[mailto:owner-p2tech@great-lakes.net]On Behalf Of KUNZ David
Sent: Wednesday, March 09, 2005 10:43 AM
To: p2tech@great-lakes.net
Subject: RE: Titanium Saw Fines


Greetings,
I am working with a facility that generates titanium fines from cutting
operations.  The fines are considered ignitable waste by DOT and there
is concern about transport of the material within the super sacks -
essentially plastic - the HW landfill. 

Treatment could be very expensive (argon or mineral oil).  Are there any
P2 approaches anyone has heard of?  Thanks 

Dave Kunz
Oregon DEQ 

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
p2tech is hosted by the Great Lakes Information Network:
http://www.great-lakes.net
To unsubscribe from this list: send mail to majordomo@great-lakes.net
with the command 'unsubscribe p2tech' in the body of your message. No
quotes or subject line are required.
About : http://www.great-lakes.net/lists/p2tech/p2tech.info
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *