[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
acetone distillation gun-washer unit
- Subject: acetone distillation gun-washer unit
- From: Jean S Waters <firstname.lastname@example.org>
- Date: Tue, 25 Jul 2006 22:57:43 -0500
- Delivered-to: email@example.com
- Delivered-to: firstname.lastname@example.org
- List-name: p2tech
- Reply-to: Jean S Waters <email@example.com>
Does anyone have any specific experience with a gun-washer, acetone
distillation combo unit?
The question comes from a company doing light RTM fiberglass manufacturing.
They have to provide some gel-coat touch up to parts as part of the
finishing process, they use paint guns to do it, and they currently just
rinse them out with acetone, spraying it into a bucket and ultimately
disposing of it as hazardous waste. Their sister plant (that makes the
boats) has a big acetone distillation unit, and they have been very careful
with it to assure they get a good product out of it, so the workers don't
revolt against the "bad acetone." Given that experience, the light RTM
plant wants to "do things right."
Any help will be appreciated!
Jean S. Waters
Pollution Prevention Regional Information Center (P2RIC)
Nebraska Business Development Center
6001 Dodge St. RH 308
Omaha, NE 68182
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
P2TECH is hosted by the Great Lakes Information Network:
To unsubscribe from this list: send mail to firstname.lastname@example.org
with the command 'unsubscribe p2tech' in the body of your message. No
quotes or subject line are required.
About : http://www.great-lakes.net/lists/p2tech/p2tech.info.
A map of P2TECH subscribers can be viewed at http://www.frappr.com/p2tech.
This list is managed by the Great Lakes Regional Pollution
Prevention Roundtable (http://www.glrppr.org), part of the
P2Rx national network of regional P2 information centers